There are quite a number of reasons why the water pressure in your house is low. Despite low water pressure mainly being associated with old pipes, there are still incidences where houses with newly installed pipes still experience the issue. Today, we are going to give you some great tips on how to increase the water pressure in your house.
First of all, it is very important to find out how low your water pressure is. You can use a pressure gauge for this task. By doing so, you are able to know whether to increase the water pressure and to what limit. A reading of 30 PSI usually calls for an increase in the water pressure. The most ideal limit would be between 45 to 55 PSI. After you have established that your house water pressure is indeed low, then you carry out following tasks to address the issue.
Related post: 7 Best Whole House Water Filtration System
Adjust Your Pressure Reducing Valve
To do this, you must find out where your water main enters your house. The water main usually has a pressure reducing valve or a pressure regulator fixed onto it. This pressure reducing valve helps you regulate the water pressure in your house. First, you need to loosen the lock nut on the valve. This will now allow you to adjust the top bolt. This bolt can be turned clockwise or anti-clockwise. Turning it clockwise will increase the water pressure whereas turning it anti-clockwise reduces the pressure.
Get a Water Pressure Booster Pump
Installing a pressure booster is another great way of increasing water pressure in your house. A water pressure booster pump is usually composed of a pressure tank and an electric pump. These components allow it to take water coming from your streets or other places and increase its pressure. There is usually a dial located on the top of the booster that allows you to adjust the pressure of the water. This can come in really handy when there is an urgent need or demand for more water pressure in your house.
ARKSEN Pressurized Water Booster Pump. See details on Amazon
Old pipes usually hinder the free flow of water due to the minerals that build up inside thereby clogging the pipes. Such pipes need to be replaced so as to allow water to flow freely and at a higher pressure. For those using galvanized steel pipes, it would be advisable to replace them with plastic or copper pipes. This is because galvanized steel pipes are usually prone to corrosion. It is also very important to check the size of the replacement pipe you want to buy because this also affects the flow of water.
Fix Your Pipe Leaks
Leaking pipes are a major cause of low water pressure in your house. Some house owners are usually quick to address the issue, while some feel it’s not a big deal and end up experiencing low water pressure. You need to ensure that there are absolutely no water leaks in your house. If there are any, then you can get a plumber or fix it yourself and you will see how drastically the water pressure in your house may change. It would be wise to begin with the main supply line before checking other areas.
Check Your Showerheads
Having enough water pressure in the bathroom is usually a must have for many house owners. Most house owners these days use showerheads and sometimes these showerheads themselves can be the cause of low pressure. This is because of the mineral build-up inside them. The minerals usually clog the showerheads hence restricting the free flow of water through them. A good way of fixing the problem would be soaking the showerheads in vinegar to eliminate the mineral build up. This will allow more water to flow through as you take a shower.
You can also opt to buy a high pressure shower head for low water pressure. These showerheads are designed to generate great water pressure without altering the water flow.
You can utilize the above tips to increase the water pressure in your house. You should however know that the more pressure you have, the more water you will be using up. This can weigh heavily on you when it comes to paying the water bill. Increase the water pressure only to an ideal point.